Floor Wax Stripper
FLOOR WAX STRIPPER is a concentrated non-ammoniated speed stripper which dissolves floor finishes without scrubbing. Floor Wax Stripper’s unique formulation saves time due to it’s mop-on, vac-off application. Floor Wax Stripper contains no alkaline builders and leaves virtually no residue on the floor’s surface.
Directions for Use:
FLOOR WAX STRIPPER May be diluted up to 12 ounces per gallon of water. Normal dilution is 1 part Floor Wax Stripper to 2-3 parts water. Although hot water works best, Floor Wax Stripper will work with cold water. Apply with clean mop over approximately 100 square feet. Allow solution to remain on floor for 3 to 5 minutes, agitate with mop and leave for 5 minutes more. Use wet vacuum or mop to pick up. Do not allow solution to soak too long as finish will re-adhere to floor. Keep container tightly closed when not in use.
Precautions
WARNING: Read all cautionary statements before using product! This product contains monoethanolamine, glycol ether and dye and may cause burns to skin and eyes. May be harmful if swallowed, inhaled or absorbed through skin. Repeated exposure may cause kidney and liver damage. Aspiration into lungs may cause damage. Use with adequate ventilation. Please read and follow label precautions and instructions. For additional safety information see Safety Data Sheet.
FIRST AID: FOR EYE CONTACT: flush affected area thoroughly with water for at least 15 minutes. Get immediate medical attention. FOR SKIN CONTACT: flush with water. Remove and thoroughly wash affected clothing prior to reuse. INHALATION: Avoid breathing vapors from this product. Ventilate area to ensure fresh supply of air to user. If inhalation does occur, get immediate medical attention. INGESTION: If swallowed, DO NOT INDUCE VOMITING. Administer large amounts of water followed by at least 1 ounce of vinegar in equal amounts of water. Get immediate medical attention.
KEEP OUT OF REACH OF CHILDREN