Directions for Use: 

For all applications the surface should be thoroughly wet with proper dilution. Soak 3-5 minutes, but DO NOT allow solution to dry on any surface as damage may occur. For heavy deposits agitate with a nylon pad or brush. Rinse all surfaces thoroughly. Repeat as needed on excessively soiled areas. 

BRIGHTEN ALUMINUM, GALVANIZED OR STAINLESS STEEL:  Mix 1 part with 3-6 parts water.

DESCALE DISHWASHING MACHINES:  Determine the total machine water capacity. Add acid detergent to the machine in the ratio of 1 part detergent to 20 parts capacity. Run machine through complete cycle. Drain. Run machine through complete cycle again.

DESCALE COFFEE URNS:  Mix 1 ounce per gallon of water. Operate machine through 1 cycle. Rinse, fill with water again, and run through cycle again. Rinse.

DESCALE PROCESSING EQUIPMENT:  Remove or cover all foodstuffs before use. Mix 2-4 ounces per gallon of water. After equipment has been cleaned and rinsed in normal manner, thoroughly wet equipment surfaces with solution. Soak 3-5 minutes. Scrub any needed areas. Rinse surface with potable water and apply a suitable sanitizer. 

CAUTION:  Wear eye protection and gloves while using this product. Avoid skin contact.

PRECAUTIONS: CAUTION! Corrosive. Store in a dry place. Prevent contact with skin and eyes. Harmful if swallowed. Read and understand correct procedures and antidotes as described on the safety data sheet before using product. Container is hazardous when empty. Contains hydrochloric and sulfuric acid, butyl, surfactants, emulsifiers, wetting agents. 
FIRST AID & ANTIDOTES: For skin contact, flush immediately with water for 15 minutes. For eye contact, flush immediately with water for 15 minutes and seek medical attention. If swallowed drink large amount of milk and water and seek immediate medical attention. 
KEEP OUT OF REACH OF CHILDREN